AMEWI PIPER J-3 CUP WITH GYRO 3-CHANNEL RTF YELLOW

Scale replica of a Piper J-3 CUP with excellent flight characteristics, which is particularly suitable for beginners thanks to the built-in gyro (attitude stabiliser) and enables all budding pilots to fly quickly and safely. The gyro neutralises almost all external influences such as wind – even control errors are ironed out when the control sticks are simply returned to the neutral position. At the same time, an attitude sensor prevents any stalling in gyro mode (max. climb and sink rate approx. 15-20°). As a 3-channel model, the Piper J-3 CUP is controlled only by the motor, the elevator and the rudder. The entire body is made of virtually indestructible EPP material. Harsh landings or light crashes are therefore absorbed without complaint, allowing for long flying fun. The propeller, made of impact-resistant plastic, was specially developed for this model. The overall durability and efficiency are outstanding – in conjunction with the powerful drive (three 0720 hollow-cup brushed motors, which engage with a main shaft), this model offers impressive flight performance. The fast digital servos with 0.08 sec / 60° ensure a direct, precise control feel. Before you can start your first flight, all you need to do is assemble the wings and undercarriage. Charge the battery at the same time and you’re ready to go.

Highlights:
Made of EPP material: Virtually indestructible and easy to repair with foam adhesive
Integrated gyro system: Additionally stabilises the flight against wind influences
Highly efficient drive: Three brushed motors drive a main shaft

Further Features:
Good visibility in the air thanks to yellow colour
Handy remote control with interference-free 2.4 GHz system
Fast digital servos (0.08 sec / 60°) for precise control feel
Ground launchable from hard runways and concrete
Hand launchable

Technical data:
Wingspan: 505mm
Length: 356mm
Height: 150mm
Weight ready to fly: 60g (without battery)
Main material: EPP (high-strength and flexible foam)
Thrust: approx. 1:1 thrust / weight ratio
Gyro: 3CH/6G self-stabilising flight attitude system
Motor: 3x 0720 hollow-cup brushed motor
Servos: 2g digital 0.08sec / 60°
Remote control: 3-channel, 2.4Ghz
Range: approx. 150m
Battery: LiPo 1S 3.7V 500mAh 20C Softcase Molex connector, 31x25x9mm, 12g
Flight time: approx. 10-15min
Charger: USB charging cable 5V
Charging time: approx. 90min

Scope of delivery:
Model
Remote control
Rechargeable battery
USB charging cable
Screwdriver
Operating instructions DE/EN

Required accessories:
4x 1.5V Mignon AAA batteries for the remote control