,

RAYTRONIC C10 charger 60W

Διαθεσιμότητα:

Σε απόθεμα

 44.90

Σε απόθεμα

Σύκριση

RAYTRONIC C10 Mini 60W is a small, easy-to-use, universal charger for home charging of all types of batteries. The C10 Mini enables charging and discharging of common cell types (NiCd, NiMH, Li-poly, Li-ion, Li-Fe, LiHV, Pb), plus a built-in four-channel balancer that ensures a very safe and comfortable recharging of lithium batteries.

Power supply 100-240 V / 50-60 Hz
For charging and discharging 6-8 NiCd / NiMH cells, 2-4 Li-ion / Li-poly / Li-Fe / LiHV cells or 6-12 V lead-acid batteries
Adjustable charging current (0.1 A – 6.0 A)
Adjustable Discharge Current (0.1 A – 2.0 A)
Max. power for charging 60 W, for 10 W discharge
Automatic charging and discharging mode for NiCd, NiMH with adjustable current limit
Charging terminated with delta-peak automatic for NiCd and NiMH batteries
Lithium and Pb batteries are charged by «constant current / constant voltage»
Adjustable delta-peak sensitivity for NiCd and NiMH batteries
Adjustable end voltage for charging and discharging for lithium batteries
Repeated cyclic charging / discharging or discharging / charging for NiCd and NiMH batteries, up to 5 cycles
Four charging modes for lithium batteries – normal charging, fast charging, balancer charging and storage charging / discharging. The last two modes require you to connect the balancing kit service connector, and in other modes it can charge with or without a balancer.
Charging is terminated when the set time, delivered charge or temperature limit is exceeded.
Memory for 5 charging / discharging programs for each battery type.
Measurement of total set voltage and individual cells (for lithium batteries).
Measurement of total internal resistance of the kit and individual cells (for lithium batteries).
Temperature sensor socket.
Charger outlet XT60.
Two-line backlit LCD display with simple and clear menu and display of parameters during charging / discharging
A number of warning text messages contribute to safe operation – incorrect input voltage, poor wiring, unsuitable battery or its condition, incorrect output polarity
Reverse polarity protection and output short circuit protection.
Compact plastic cabinet, small size
Built-in fan for forced cooling
Built-in power supply.

The charger is equipped with an XT60 output socket and a universal JST-XH service connector socket that allows you to directly connect battery power cables and JST-XH 2-6S service connectors. adapters. You can use standard Sky RC or RC System adapters to connect other system service connectors, where you cut off the output connector with the 5th and 6th channel contacts.

You can buy a temperature sensor to measure the temperature of charged / discharged batteries.

Note: The charger uses a terminal voltage of 2.40 V / cell when recharging lead-acid batteries. It is not suitable for charging gas-tight gel batteries that must not be charged at more than 2.30 V / cell.

Charger kit includes: RAYTRONIC C10 Mini charger, mains cable, instructions.

Input Voltage (AC - AC) [V]             100 - 240
Charging Current [A]                    0.1 - 6
Charging power [W]                      60
Discharging current [A]                 0.1 - 2
Discharge Power [W]                     10
Number of channels                      1
NiCd [Art.                              6 - 8
NiMH [Art.                              6 - 8
Li-Pol [Art.                            2 - 4
Li-Ion [Art.                            2 - 4
Li-Fe [Art.                             2 - 4
Li-HV [Art.                             2 - 4
Pb [Art.                                3 - 6
Balancer                                Yes
Balancer Current [mA]                   300
Length [mm]:                            115
Width [mm]                              112
Height [mm]                             55
Weight [g]                              302
Κωδικός προϊόντος: 3EC1010 Κατηγορίες: , Ετικέτα:
Κατασκευαστής:

Καλάθι

close