, , ,

TAMIYA 1:10 RC Alfa Rom. Giulia Spr. Club MB-01 – KIT – Συναρμολογούμενο

Κωδικός προϊόντος: 58732
Διαθεσιμότητα:

Σε απόθεμα


Σύκριση

ΠΡΟΣΟΧΗ: Το συγκεκριμένο τηλ/νόμενο αυτοκίνητο έρχεται σε μορφή KIT !

Απαιτείται συναρμολόγηση & Βάψιμο lexan καρότσας.

(ενδεικτική φωτογραφία)

Επίσης θα χρειαστείτε :

  1. Servo τιμονιού
  2. Τηλεκατεύθυνση – Δέκτη
  3. Μπαταρία
  4. Φορτιστή

 179.00

Σε απόθεμα

ΠΡΟΣΟΧΗ: Το συγκεκριμένο τηλ/νόμενο αυτοκίνητο έρχεται σε μορφή KIT !

Απαιτείται συναρμολόγηση & Βάψιμο lexan καρότσας.

Επίσης θα χρειαστείτε :

  1. Servo τιμονιού
  2. Τηλεκατεύθυνση – Δέκτη
  3. Μπαταρία
  4. Φορτιστή

(Μοτέρ κίνησης & ESC περιλαμβάνονται στην συσκευασία)

(ενδεικτική φωτογραφία)

Article number: 300058732
Product: 1:10 RC Alfa Rom. Giulia Spr. Club MB-01

Here is another R/C kit with the MB-01 chassis – this time, middle wheelbase and midship rear motor / rear wheel drive (MR). This R/C kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack.
About the MB-01 chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.

2WD assembly Kit, MB-01 Chassis,
Electronic speed controller, 540 motor,
Double wishbone, 3 wheelbases,
Manual, clear polycarbonat body

WARNING!
Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.
When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.
Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).
Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

 

Warning! Not suitable for children under 14 years.


Product details

– This is a 1/10 scale R/C model assembly kit. Length: 385mm, width: 167mm, height: 132mm. Wheelbase: 225mm (Middle wheelbase).
– The form of the Alfa Romeo Giulia Sprint GTA Club Racer is recreated in lightweight polycarbonate.
– Features 60mm front and rear tires. Use 60D tires when changing tires.
– This kit includes stickers to create a design inspired by the numerous club racers driven run by amateur drivers.

Κωδικός προϊόντος: 58732 Κατηγορίες: , , ,
Κατασκευαστής:
Βάρος 4.00 kg
Rc-car Κλίμακα

1:10

RC Car συναρμολόγηση

KIT

Κίνηση

4wd

Καλάθι

close